To connect using the unit settings (1)
1.Press on the control panel.
2.Touch [Bluetooth].
3.Touch [Search for Bluetooth devices]. If you want to cancel, touch [Cancel].
4.Touch a bluetooth phone you desire from the “Bluetooth devices” screen.
5.Input the passkey (Default: 0000) showed on the screen in your phone when the pop-up screen is displayed on the screen. When it is successfully connected, the Bluetooth main screen appears on the screen. When it is not connected, the connection failure message appears on the screen.
If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine is probably too hot. If this happens,
you should:
1. Pull off the roa ...
Accelerator Position Sensor (APS). Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the ...
Crash Pad. Repair procedures
Replacement
Cluster Replacement
•
A plastic trim tool is recommended, but if
prying wit ...