Hyundai Veloster Manuals

Hyundai Veloster: Intake Air Temperature Sensor (IATS). Repair procedures - Engine Control System - Fuel SystemHyundai Veloster: Intake Air Temperature Sensor (IATS). Repair procedures

Hyundai Veloster 2011-2017 Service Manual / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS). Repair procedures

Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specification.

Specification: Refer to “Specification”


Intake Air Temperature Sensor (IATS). Schematic Diagrams
Circuit Diagram ...

Engine Coolant Temperature Sensor (ECTS). Description and Operation
Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor th ...

See also:

Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than one mile (1. ...

ETC (Electronic Throttle Control) System. Description and Operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle ...

Mirror. Repair procedures
Replacement Outside Rear View Mirror Replacement • When prying with a flat-tip screwdriver, ...

Categories


© 2011-2024 Copyright www.hvmanual.com