Hyundai Veloster: Positive Crankcase Ventilation (PCV) Valve. Repair procedures

Hyundai Veloster 2011-2017 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve. Repair procedures

Removal

1.	Disconnect the vapor hose (A).

2.	Remove the PCV valve (B).

Inspection

1.

Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Installation

1.

Installation is reverse of removal.

PCV Valve installation:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Positive Crankcase Ventilation (PCV) Valve. Description and Operation

Operation Principle ...

Evaporative Emission Control System

...

See also:

Repair procedures
Troubleshooting Starter Circuit The battery must be in good condition and fully charged. 1. Remove ...

Radial-ply tires
Radial-ply tires provide improved tread life, road hazard resistance and smoother high speed ride. The radial- ply tires used on this vehicle are of belted construction, and are selected to comple ...

Front Door. Components and Components Location
Components 1. Front door trim 2. Front door grip handle outer cover 3. Front door inside handle cap 4. Front door quadrant inner cover 5. Front door trim seal 6. Fr ...

Categories

© 2011-2025 Copyright www.hvmanual.com