Hyundai Veloster: Rear Axle Assembly

Front Driveshaft. Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and ...

Rear Hub - Carrier. Components and Components Location

Components 1. Rear torsion beam assembly 2. Rear dust cover 3. Rear wheel hub assembly 4. Rear brake disc ...

See also:

Brake/clutch fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Rail Pressure Sensor (RPS). Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built ...

Inhibitor Switch > Repair procedures
Inspection 1. Inspect for loosened connectors, faulty connections, bends, corrosion, contamination, deformation, or damage. 2. Disconnec ...