Description
Never attempt to measure the circuit resistance of the Seat Belt
Pretensioner (BPT) even if you are using the specified tester. If the
circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury.
|
SRS Control Module (SRSCM). Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before b ...
Servicing The Electrical System
1.
Prior to servicing the electrical system, be sure to turn off
the ignition switch and disconnect the battery ground cable.
...
Steering Gear box. Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...