Push the switch to turn the light on or off.
• : The lamp will turn on if this
button is pressed.
• : The lamp will
turn off if this button is pressed.
CAUTION - Vanity mirror lamp (if equipped)
Always have the switch in the off position when the vanity mirror lamp is not in use. If the sunvisor is closed without the lamp off, it may discharge the battery or damage the sunvisor.
Hazard Lamp Switch. Repair procedures
Inspection
1.
The GDS will be able to diagnose defects of hazard switch quickly.
The GDS can operates actuator manually, input/output value monitoring
and self diagno ...
Knock Sensor (KS). Description and Operation
Description
Knocking is a phenomenon characterized by undesirable vibration and noise
and can cause engine damage. Knock Sensor (KS) is installed on the cylinder
block and senses engine knoc ...
Wheel. Repair procedures
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...